MIG Welding Machine
MIG/MMA Power Source Thyristor Regulated
with separate Wire Feed Unit.
Model 350E /450E /900E
|
|
Heavy duty Industrial range of Multi Process power sources. Standard model + high current version capable of arc air gouging up to 12mm carbons.
|
- Available in
- 350 and 450 Amp @ 60% Duty Cycle
- 900 amp @ 60% Duty Cycle
- 18-44 volts constant voltage infinitely variable.
- Conventional 6 Thryristor regulated output with 3 position output inductance.
- Volts can be set on power source or remotely on WFU.
- 0.8mm - 1.6mm solid wires 1.2mm - 2.4mm Flux Cored Wires.
- Digital Ammeter/ Voltmeter
- MMA + Arc Air capability.
- Cylinder/water cooler carrier. Undercarriage.
- Sheathed interconnecting cables .Up to 20 Metres
- Mains input cable.
- Heavy Duty copper wound transformer + Choke.
- Complies with C.E. Regulations.
- 3 phase 415 volt input.
|
Designed and Manufactured in the UK. 
|
|
4 Roll Wire Feed Unit with Euroadaptor.
|
- Grooved or knurled rollers.
- Spool holder/brake hub.
- Burn back adjustment.
- Wire feed speed control/Voltage adjustment.
- 2/4 stroke trigger latch.
- Gas purge/ Cold wire feed push buttons.
- Swivel Bracket (Wire Feed Mount).
- Large coil adapter.
- Complies with C.E. Requirements.
|
|
Optional equipment.
- HF400 EM Tig box + interconnecting harness.
- External water cooling unit. 240 volts, internally powered
- Extended interconnecting cables.
- Arc Air torch + cable/airline hose supply.
- MB501 water Cooled Torch.
- Large Wheel Undercarriage Set
|
|
