MIG Welding Machine
Switched Voltage Fine/Course
with separate Wire Feed Unit.
Model 300/350/400/450 and 500
Available in 300 350 400 450 and 500 Amps. @ 60% Duty Cycle.
  • Conventional switched power sources are more economical to manufacture than thyristor regulated.
  • High/Low range switch.
  • Heavy Duty Copper Wound Transformer + Choke
  • Cylinder/water cooler carrier. Undercarriage.
  • Shown with wire feeder swivel bracket.
  • Sheathed interconnecting cables.Up to 20 Metres
  • Mains input cable.
  • 0.8mm - 1.6mm solid wires 1.2mm - 2.4mm Flux Cored Wires.
  • C E marked to comply with regulations.
MIG Welding Machine Switched Voltage Fine/Course with seperate wire feed unit

Designed and Manufactured in the UK.

MIG Welding Machine Switched Voltage Fine/Course with seperate wire feed unit
4 Roll Wire Feed Unit with Euroadaptor.
  • Grooved or knurled rollers.
  • Spool holder/brake hub.
  • Burn back adjustment.
  • Wire feed speed control/Voltage adjustment.
  • 2/4 stroke trigger latch.
  • Gas purge/ Cold wire feed push buttons.
  • Swivel Bracket (Wire Feed Mount).
  • Large coil adapter.
  • Complies with C.E. Requirements.
MIG Welding Machine Switched Voltage Fine/Course with seperate wire feed unit

Optional equipment.
  • External water cooling unit. 240 volts, internally powered.
  • MB501 Water Cooled Torch.
  • Digital Ammeter /Voltmeter.
  • Large Undercarriage Wheel Set.
Prices
Mig 300 switched c/w F4 4 roll Wire Feed Unit and 5m interconnecting cable £1,245.00
Mig 350 switched c/w F4 4 roll Wire Feed Unit and 5m interconnecting cable £1,340.00
Mig 400 switched c/w F4 4 roll Wire Feed Unit and 5m interconnecting cable £1,430.00
Mig 450 switched c/w F4 4 roll Wire Feed Unit and 5m interconnecting cable £1,505.00
Mig 500 switched c/w F4 4 roll Wire Feed Unit and 5m interconnecting cable £1,580.00 £1,580.00
Optional Equipment
Digital Meters Kit £68.00
Water cooler Fitted ( Fits on cylinder carrier) £395.00
Large Undercarriage Wheel Set. £24.00
MB501 Water Cooled Torch. £99.00
Back